Selling Your Car Quickly and Easily to Potential Car Buyers

It can be frustrating when you have a vehicle that does not work, but you might not feel like it is worth it to have it towed. It might be a complete junk vehicle that could only be used for parts. Even in this case, there are car buyers out there today that will be interested in purchasing it, even if just for parts or a project. When looking for someone to purchase your vehicle, you will want someone who will show up when they say they will and be able to come up with the agreed upon amount.

It is important that the car buyers that you choose are trustworthy. One way that a buyer can gain your confidence is if they are punctual. If they say they will be there in an hour, then you should be able to plan on this. If they say a different time, they should guarantee that they will be prompt in this amount of time. Sometimes you might have a busy schedule and if your potential purchaser ruins it, you may have a hard time believing the rest of the sale will go smoothly.

Another area in which car buyers should be reliable in is the money they offer. If they claim to give top-dollar, then it should be a higher number than a junk yard or someone buying for parts. Try not to be suspicious of the amount they offer and accept it as just what they do.

Maybe your vehicle is not an old junker but you are just ready to sell it. Perhaps you have taken it to trade-in places and the prices they offer just do not seem worth it. You might want to call a variety of car buyers that are willing to come to you. They may give you a better price than a trade-in location, and you will not have to leave your home.

Think of this as a sort of cash-for-gold for those who consider old cars or any cars for that matter - gold. Make sure that you check out the businesses you talk to before having them come out. You should check with the Better Business Bureau to see if there are complaints about the companies. You can also look for online reviews to see what other people's experiences were with a particular company.

Once you check into the reputation and reliability of car buyers that are out there today, hopefully you will find one that sounds good to you. There should be no requirement to sell even if they come all the way to your home, so you may end up calling a few places until you get the prices that you desire for your vehicle. Those who have collected a number of old vehicles over the years could really benefit from calling one of these companies.

In search of Atlanta car buyers for your automobile, no matter the condition? Check out http://www.cashformyjunkcaratlanta.com/ to learn more!

View the original article here

How to Prolong Your Car Engine's Life

The engine is one of the most important components of your car and this should be maintained regularly. This is because the engine performs the basic function of providing power for the car and allows it to run or move from one place to another. Due to this, there is a great need for both expensive and cheap new car owners to make sure that the engines of their vehicles are in good shape. It is therefore important for car owners to determine and understand some of the basic tips in preserving the life of their cars' engines. In case you want to extend the life of your vehicle's engine and you are to sell the car after your auto financing obligations are settled, try to do some of things below.

1. Practice regular change oil

The car's engine oil serves as the vehicle's blood. Given this, you need to make sure that the oil inside the engine is clean as well as capable of lubricating and cooling the internal components found inside.  Due to this, it is advisable that you change oil regularly.

All you need to do is take your vehicle to the nearest car service center for an oil change. However, you can also change your vehicle's oil by yourself.  All you need to do is look for useful car advice online regarding this particular car maintenance task. Changing the car engine's oil on your own could save you from incurring extra expenses.

2. Drive carefully

You also need to drive your car carefully so as to extend the life of its engine. Try to avoid jackrabbit starts and sudden brakes for this would create strains as well as possible damages on the engine. Inappropriate driving practices could also create wild RPM fluctuations and generate heat that is harmful. Try to drive your car like a gentleman at moderate speeds.

3. Have your car engine regularly tuned-up

Aside from driving carefully and changing the car's oil regularly, you need to have your vehicle regularly tuned-up. This will ensure that the engine runs smoothly. For better results, it is advisable that you take your car to a professional mechanic for servicing since the mechanic is trained to do the appropriate procedures to tune the car up. But if you want to save money and do the tune-up by yourself, all you need to do is to conduct the needed research on how to do the procedures.

Marty Bay is an Automotive Journalist providing helpful tips and advice which powers the Car Finder at the Car Finder Service website.

Buying a Car? Get your auto price quote through our network of certified dealerships.

Things You Should Know About the Dodge ECM

Today only a small percentage of people are still surprised that their cars are equipped with computers. The majority of car owners and drivers know that cars have up to seven microprocessors in the vehicle. These microprocessors enhance performance, comfort, and safety and are environment friendly.

Let's take a look at what the Engine Control Module (ECM) does in your car. It controls the fuel injection, the ignition timing and everything else that makes the drive smooth. If the ECM starts malfunctioning, then its time you thought of a replacement.

It is not for nothing that the Federal Government has mandated that fuel injection systems and ignition, in motor vehicles, must be computer controlled. There are three reasons for this move. Safety is the primary reason, followed closely by fuel efficiency and finally to bring down emissions.

In a number of cases, mechanics and owners have not been able to find out the real cause for problems in starting the cars. Take the case of my friend's Dodge ECM. He spend over $1000 on repairs and replacing parts before he realized that all that was required was that the ECM had to be replaced. So it is important that you identify the problem properly.

Parts such as the distributor, battery, ISC (idle speed control) motor, injectors, TPS (throttle position switch) and intake cam sensors are the ones which are often misdiagnosed as faulty. So if the mechanic does not realize that the fault is with ECM, you will end up paying a lot of money for parts you don't require.

When you are trying to locate a problem in the fuel injection systems you should take the informed approach to find out the error in the engine computer. In the case of the Dodge ECM, you should get it tested to see if it is functioning as per norm. What is required is an analog volt/ohmmeter. You need to place the testers on the top right and the bottom left pin for the ECM scan cable harness. If there is a total sweep from left to right then your Dodge ECM is functioning well. If the movement is only to the left, it means the ECM is not working.

You should get your Dodge ECM scanned by the authorized personnel who have the right tools for this function. Many of the manufacturers have tools for scanning the ECMs. The scan will throw up the errors. You can also check the ECM without the scan tools; for that you will have to refer to the manufacturer's manual.

The methods to monitor the malfunction indicator lamp (MIL) differ on certain vehicles. Some vehicles have an MIL built into the ECM while in some the check engine light will glow in series.
You will need to check the Dodge ECM if there is starting trouble. If the engine computer has packed up then you need to get a replacement. There are many online stores where you could pick up an ECM which is programmed for your vehicle.

There are also places where you could repair the Dodge ECM. These online stores are cheaper than the dealers. These remanufactured ECMs are ready for shipping so there is no waiting time.

Thank you for reading this article. For loads of more information on the Dodge ECM please visit our website.

View the original article here

Replacing the Jeep PCM

Replacement of the PCM (powertrain control module) in Jeeps is in great demand these days, because there seems to be a rather large rate of failure for these automobile microprocessors in the US.

So what is a PCM and what is its function in your Jeep?
The PCM, called the JTEC or Jeep/Truck Engine Controller, like its name suggests is positioned in the engine. This triple microprocessor is digital and pre programmed. The PCM controls the ignition timing, emission control, fuel systems, air-fuel ration, charging system, speed control, idle speed and air conditioning.

The PCM gets inputs from a number of sensors and switches and acts on the inputs to regulate the working of the engine. The programming is adapted to changing climatic conditions.

How well a vehicle performs is dependent on how good the powertrain is. Vehicles with automatic transmission are totally computerized and the computer will indicate when the gears have to be shifted. In manual transmission vehicles, the driver learns through trial and error when to change gears to get the best possible mileage and performance from the vehicle.

Off roaders will find that they can fine tune the transmission shifting points and the engine by slightly tweaking the software with an electronic device which is connected to the Jeep PCM. This really helps driving when they off-road.

If the Jeep PCM fails, then there will be a number of problems; error lights will appear on the dash, there will be electrical issues and in most parts the Jeep will not run properly.

However, most problems of the Jeep PCM are rooted in some common faults. The first one is when there is surplus voltage. Sometimes there could a short circuit in the supply or wiring. If the vehicle gets a shock then the PCM will be affected. Too much of power can burn out the PCM. This happens in general with the actuator or solenoid circuit.

Corrosion, vibrations and thermal stress are also factors which can adversely impact your Jeep PCM. A word of warning to off-roaders; if the PCM gets water logged or bogged in mud it will result in failure.

Some cases of failure have been attributed to a manufacturing defect. So if you have the misfortune to get a faulty PCM and your Jeep is not too old, better replace the PCM.

There are a lot of places where you can find high quality PCMs. Some of the better online stores and dealers offer you trained engineers who will build up the Jeep PCM and program it to your vehicle.

The PCM then under goes some very stringent quality control tests and is measured against the OEM (original equipment manufacturer) standards. This is not a difficult task. You will need to give them the mileage and the VIN (vehicle identification number) of your vehicle. This will ensure that the PCM is calibrated properly and will easily facilitate plug and play. So once the Jeep PCM is fitted you will be on the road again.

Thank you for reading this article. For loads of more information on the Jeep PCM please visit our website.

LED Scanner Lighting Kit To Make Your Cars Attractive

The 5050 RGB SMD LED Scanner Lighting Kit contains 4 seven inch LED lights which you can install in your car to give it a stylish look. There are also a number of flashing patters in it which will blow your mind away. Installing this lighting kit is even easier. You have to simply mount the kit to the front grille of your car and connect the red and black wires to the negative and positive terminals of your car's battery respectively. Having done with that, you will have these beautiful and amazing lights successfully installed in your car. Kids simply love these lights! Here, in this article we have discussed about the features and functions of these lights to give you a glance about them.

Features:

The kit comes with a 4 piece 7 inch LED strips (this means that each strip contains 12 pieces of SMD LED Lights).55 types of different flashing patters to choose from.Comes with a remote control to turn on the LED and to change the flashing pattern. The range of the remote control is 60 ft.It is100% water resistant and so you won't have to worry about the kit when doing extreme driving.Easy to install and in fact you can do it by yourself as well! All you need to do is to tap the red wire to the positive terminal and the black wire to the negative terminal of the battery.

The functions of its remote:

You can turn them on and off with the remote.You can change color of the lights according to your liking.You can also change the flashing patter and pick any other patter from the 55 different flashing patterns.Also, with the remote control you can change the speed with which the flash patterns run.

What is in the 5050 RGB SMD LED Scanner Lighting Kit?

In the package you will get one set of LED knight lights kit (i.e. 12-SMD LED Scanner Lighting Kit) and a remote control.

It will add a new charm to your car and will give it a chic and urban look. With this kit installed in your car it will be hard for the people on streets to let go your car unnoticed. The best thing about this kit is that it is very easy to install and it has 55 different flashing patters to choose from.

To win a set 7-color LED scanner lights, please visit iJDMTOY.com, the car LED guru for more detail.

MyLink Vs Blue Link

Two of the most popular telematics systems used on some of the vehicle models in the market is Hyundai's "Blue Link" and Chevrolet's "MyLink". This is the reason why a lot of car experts and automotive journalists are making their own telematics review on these. Almost every telematics review has tried to compare the features, functions, and benefits of these systems. Due to this, a few similarities as well as differences were highlighted and some of these are the following.

1. Features

Majority of the telematics review that were focused on examining the features of Hyundai's Blue Link and Chevrolet's MyLink found out that the two systems are offering almost similar features. Both of these systems allow their users to integrate their smartphones into their vehicles' telematics systems and use these to connect to the outside world by making and receiving calls, sending and receiving messages, and searching the internet.

Aside from that, MyLink and Blue Link also provide a number of safety features that ensure the car occupants' safety in the event of accident or other emergency situations. Blue Link provides a number of safety applications such as SOS emergency Assistance and crash notifications. MyLink on the other hand offers turn-by-turn navigation, automatic crash response, and live advisor. Through these features, the vehicles equipped with MyLink and Blue Link are safer compared to those that are not using any telematics system.

2. Benefits

The benefits provided by Hyundai's Blue Link and Chevrolet's MyLink are also quite similar. Both of these telematics system allow their users to connect to the outside world while driving by making or receiving calls as well as messages and connect to the internet. These systems also provide entertainment to the car occupants by allowing them to access different music files using the telematics system. Finally, Blue Link and MyLink are making the vehicles equipped with these systems safer by providing additional safety applications in the event of emergencies.

3. Pricing

In terms of pricing, Blue Link is cheaper compared to MyLink. In fact, pricing is considered as the most significant difference among the two. Hyundai has ensured that the telematics systems that they install on their vehicles are cheap enough to allow their growing number of customers to spend lesser amounts of money just to purchase these. However, the demand for MyLink-equipped cars is still overwhelming despite of its relatively higher price and this makes the competition between the two more intense.

Marty Bay is an Automotive Journalist providing helpful tips and advice which powers the Car Finder at the Car Finder Service website.

Buying a Car? Get your auto price quote through our network of certified dealerships.

How to Choose a DVLA New Style Registration

Choosing a New style DVLA number plate is quite a simple exercise. Just like when choosing a prefix style registration, the most important thing to consider is the age of the car you are buying for. The reason that this is so important is because you cannot make a vehicle look newer than it actually is. It's not quite so simple just knowing what year the car was manufactured as the DVLA have now made things very complicated.

For example, if you have a car made in 2003, it could be a "52" plate car or a "03" plate car or even a "53" plated car. It is now more important than ever to know the precise date of first registration so that the number plate dealer can assist you without a problem.

When you have established the actual date of registration, the next step is to choose the letters to appear in the plate. A very popular choice with this type of plate is to have both his and hers initials. So for example, assuming the car was registered as XC03 VBF this would mean that it was registered between 1st March 2003 and 31st August 2003 and so John Smith and Mary Veronica Smith could have JS03 MVS to represent both their names on the registration plate. In fact they could have any number plate with the same letters providing that the numbers in the middle were issued prior to the "03" plate.

The order of the numbers issued in chronological order are 51, 02, 52, 03, 53, 04, 54, 05, 55, 06, 56, 07, 57, 08, 58, 09, 59, 10, 60, 11 and 61 up until this point. The change of number is made each March and September and it's a simple calculation of adding 50 to the current release to determine the next in line.

Popular combinations of letters and numbers include the OO07 plates to resemble the James Bond theme and lots of drivers plump for the MR or XX prefix part of number plate as it more striking. Some combinations have been withdrawn from sale by the DVLA so that they can be sold at auction where they attract much higher sums of money. Number plates such as XX51 NGH and DH11 LON have recently been sold for huge sums of money. Although the new style DVLA number plates are not as popular with motorists as the prefix style, they will be around for the next 40 years so eventually they will grow on us.

The Private Plate Company are one of the longest trading private number plate dealers in the UK. Their success is attributed to their ability to provide quality private number plates at sensible prices in the quickest possible time.